How to ROOT the new TMOBILE SLIDE

/

myTouch 3G Slide is T-Mobile’s next android phone, and it will be available in June. TheT-Mobile myTouch 3G Slide runs Android 2.1.The myTouch 3G Slide features a 600-MHz Qualcomm MSM7227 processor, a 3.4-inch 320×480 HVGA AMOLED display, 512MB of internal storage, a slide-out QWERTY keyboard, a 5.0 megapixel camera, a 8GB MicroSD card, HSDPA 7.2 for high-speed, GPS, Wi-Fi, stereo Bluetooth and a 1300 mAH battery.

Download This Package > Root.zip

How-TO Root the SlideStep 0.
Un-zip the Package you Downloaded
Step 6. When recovery loads, you should Have an Offline Device. You can use ctrl+c to stop your script & see.
If this doesn’t happen, Power Off and try again..

Step 7. Un-plug your USB cable from the back of your phone & Plug it back in for it to Detect ADB Correctly!!! This is an important step. At this point you can adb devices to see if you can see your device and that it is in recovery mode.

Step 8. Hit Volume Up + Power button to Bring up the Selectable Menu
Select Update.zip from the menu. (This will fail, but we already know that! Select it anyway).

Step 9. adb push ota.zip /sdcard/update.zip (*OSX users add a ./ in front of all terminal commands please.)

Step 11. This is Very important!! Have this Command ready in your prompt before applying update.zip again!!

This is the Command, We do not Push this Yet adb push update.zip /sdcard
step 12.
Hit run update.zip, as soon as you see a Little Bar appear under the text, push Enter to execute the command in your prompt (adb push update.zip /sdcard )Step 13.
In successful, you should see Clockwork Recovery & you Now have Su & Superuser.apk Installed! You can Now Reboot Your Phone into the OS to verify.
If unsuccessful, repeat steps 11 & 12.

Congrats.

First!! – Go to Settings > Application > Development and turn on USB Debugging. This should save you headaches.

NOW… Power Off the Slide

Step 1. Place the Contents of “update.zip” & “ota.zip” & “loop” into your Android SDK Tools folder.

Step 2. Open Command Prompt or Terminal and CD to the SDK/Tools Directory.

Step 3. Power on the Slide into the bootloader by Holding Down ( Volume Down + Power Button )

Step 4. Now run your loop file from the prompt (either type “loop” in windows or “./loop.sh” in a *nix like) (  ./ Is used For OSX )

Step 5. Once your loop is running in your prompt, select Recovery from the bootloader menu.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: